Introduction and function of combined ground preparation machine


Introduction and function of combined ground preparation machine


Introduction of traction combination soil preparation machine:


The combined soil preparation machine is a multifunctional soil preparation machine, which is composed of a frame, a traction frame, an intermediate beam, a gearbox, a transmission box, a subsoiling shovel assembly, a stubble removal component and a rotary tillage component. The transmission box is arranged on one side of the frame., There are seven gears meshing with each other in the transmission box. The middle beam is arranged in parallel between the rotary tiller shaft and the short stubble shaft. The bottom soil shovel assembly is installed on the beam. The rotary tiller shaft directly drives the output shaft of the gearbox; The output shaft is connected with the input shaft of the gearbox through a universal coupling, and the short stubble shaft is driven by the output shaft of the gearbox.

联合整地机

Functional advantages of combined ground preparation machine:


1, deep loosening combined soil preparation operation effect is good, can effectively complete the soil deep loosening, crushing, leveling and other operations. 2. Wheeled tractor with 190-220 horsepower; 3. Working width: 3.5 m; 4. Tillage depth: 30-450cm; 5. Structure: front double-row deep loosening rod teeth and rear V-shaped double-row slotted rake; 6. Frame type: integrated type; 7. The number of deep loosening teeth is 13.8. Sharp shovel form: double-headed shovel tip, interchangeable; 9. The deep loosening rod teeth adopt hollow steel pipe structure, good flexibility, can be bent horizontally 20cm. After removing the external force, it can automatically return to the original position; 10. With a safety bolt protection device, when the safety bolt is disconnected due to external impact or overload operation, it can protect the frame and deep loosening teeth from damage;


The combined soil preparation machine is a large and medium-sized tractor duplex machine, which can complete parking, rotary tillage, deep tillage, ridge cultivation, cracking and other operations at the same time, and has the characteristics of high operation efficiency. Break the bottom of the plow, restore the structure of the plow layer, improve the water retention capacity of the soil, remove some weeds, reduce diseases and insect pests, level the surface, and improve the level of agricultural mechanization.


The combined ground preparation machine is a kind of multifunctional ground operation machinery, which is composed of frame, traction frame, middle beam, gearbox, gearbox, underground machinery and so on. The transmission device is arranged on one side of the frame. The transmission device has seven transmission devices. The middle beam is parallel to the rotating shaft and the stubble shaft. The beam is provided with a lower ground mechanical part. The rotating shaft is directly driven by the gear output shaft; the transmission side output shaft is connected with the gear input shaft through a universal rod, and the gear rail is driven by the gear output shaft. Mandatory levelling has been ordered.


Principle: Install the leveling shovel and the suspension frame under one end of the frame, connect the grinding roller frame with the adjusting screw at the end of the frame, and install the spring tooth spring bolt between the leveling shovel and the rolling machine. After the shovel is dug out of the formation, the spring teeth loosen the formation, and the roller crushes the formation and presses the bottom of the pot. It is a soil processor that does not rotate the floor during operation.


Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.