How to maintain planter accessories
Release time:
2021-01-13 14:55
Source:
planterA planting machine using a crop seed as a sown object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories.
in useplanterBefore, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. Planter will extend the service life, can bring more economic benefits.
Secondly, maintenanceplanterAccessories. Most accidents in planter accessories are bent. These reasons are mainly due to people overloading the planter accessories. These causes will cause the planter accessories to be damaged. The planter manufacturer reminds us that when using the planter, we should avoid working under overload working conditions.
In addition, among the planter accessories, the more easily damaged parts are mainly nylon, cast iron, steel parts and cast iron parts. These parts are often replaced. Therefore, when using the planter, we avoid the premature scrapping of the planter accessories. Therefore, the planter manufacturer reminds that when using the planter, we should always pay attention to cleaning the planter accessories to prevent sand or large dust from falling into the machine.
The above isplanterThe relevant knowledge of how to maintain the accessories of the planter explained by the manufacturer will be helpful to everyone. If you want to know more about the relevant knowledge of the planter, you can pay attention to our official website news, and we will continue to update it.
Related News
The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.
How to maintain planter accessories
Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.
Defects in castings and forgings
The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.
Production of castings and forgings
Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.
Inspection of Casting and Forging
The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.
What are the advantages and disadvantages of casting and forging
One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.
CONTACT US
E-mail : dadi@disc.net.cn
Tel : +86-534-2128662
Tel : +86-534-8103188
E-mail : yaoqiang@disc.net.cn
E-mail : zf@disc.net.cn
WhatsApp : +8613953408459
Add : Yucheng (provincial level) High-tech Development Zone, Shandong Province, China
MESSAGE
Copyright : Yucheng Dadi Machinery Manufacturing Co., Ltd. Powered by : 300.cn jinan2 Seo Business License
