Use of Seeder

planterPre-operation inspection: lubrication of planter; Tire pressure; Tightening degree of bolts, pins and fasteners; Sealing of hydraulic oil pipes, equipment and hydraulic cylinders; Aging and damaged parts of planter shall be repaired and replaced before landing. Rotate the transmission wheel to observe whether the transmission mechanism and seed (fertilizer) gauge work normally and whether the seed and fertilizer are discharged smoothly. For the mode of mixed application of seed and fertilizer, the selection of fertilizer and the amount of fertilizer applied shall be in accordance with the instructions. Improper use will burn seeds and affect seedling emergence; when seeds are mixed with drugs, protective equipment should be worn and the remaining liquid medicine should be properly disposed.




Special attention should be paid to safety when the planter is connected with a tractor with matching power. The installer must not stand between the planter and the moving tractor, otherwise it may cause serious injury. According to the agronomic requirements, adjust the sowing rate and fertilization rate in accordance with the instructions. After adjustment, trial sowing shall be carried out to check whether ditching, sowing depth, sowing amount and fertilization amount meet agronomic requirements. When sowing, the entire planter should be in a horizontal state, both horizontal (viewed from the side of the tractor) and vertical (viewed along the direction of the tractor). Sow seeds at an appropriate speed as specified in the operating instructions. If the operation speed is too fast, it may cause uneven seed distribution, increased sowing depth, and broken seeds; when turning to the ground, moderately raise the planter; do not reverse the ditching machine when it is buried, because reversing will damage the ditching machine or seeding device. Block the ditching machine.
When the planter is operating, the working condition of the planter should be observed at any time, and targeted adjustments should be made when abnormal conditions such as trenching and sowing are found. After each operation, the residue in the seed box and fertilizer box should be completely removed, and the planter should be kept stable and reliable when parked. Use and maintenance of rice tray planter. The realization of rice transplanting and sowing mechanization is not only conducive to the development of China's agricultural economy, but also can improve the yield of rice. Therefore, in recent years, in the process of the development of rice production in China, people use the rice tray seedling seeder to ensure rice production.
In the process of China's agricultural economic development, the innovation and development of rice planting technology is of great significance, which is not only conducive to the improvement of rice production in China, but also promotes the development of China's national economy. Therefore, in the current rice cultivation process, people have widely applied the mechanized production of rice to the horizontal planting and cultivation process, making the traditional artificial cultivation method completely replaced. However, in the process of use, the rice plug seedling planter is easily affected by various factors, which makes the rice plug seedling planter unable to work normally. Therefore, in order to ensure that rice production is not affected by various factors, people have adopted relevant technologies to maintain the rice tray seedling planter.
Want to know moreCombined soil preparation machine, rake toothThe content, can pay attention to our official website.

Related News

Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.

How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.

Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.

Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.

Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.

What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.