Characteristics of lawn mower

Effective: Generally per unitlawn mowerIt can weed more than 8*667 meters per day, which is equivalent to manual weeding of 16 shells (0.5*667 meters per day).
Good economic benefits: Because the lawn mower rotates faster, the laser cutting effect on plantation weeds is very good, especially for weeds with high tender grass, the actual effect is better. Generally, weeding is three times a year, which basically meets the weeding regulations.




Soil and water conservation: the shovel is used for artificial weeding, because the soil is loose when weeding, which usually leads to certain soil erosion. The soil erosion caused by artificial weeding of terraces will be more serious. The lawn mower is used for weeding, because it only uses a laser to cut off part of the weeds on the ground, and there is basically no harm to the surface of the soil. In addition, the soil and water conservation effect of grass roots is extremely beneficial to soil and water conservation.
Improve fertilizer efficiency: lawn mower weeding to wait for weeds to grow to a certain aspect ratio before it can be carried out. Many weeds cut down can cover plantations and can be used as organic fertilizer in plantations to improve soil organic matter.
The effect of suitable engine oil on the lawn mower equipment is: humidification, cooling, cleaning, and improving the sealing of the piston rod. After the equipment is used for a period of time, as the smoke in the air and the metal material debris damaged by the equipment enter the oil, the oil becomes hot and moves, and its various characteristics will degrade. If the oil is not replaced immediately, it may accelerate equipment damage, shorten the service life of the equipment, and even cause safety accidents such as bearings, engine cylinder pulling, and crankshaft breakage. Therefore, the oil should be changed within a certain period of time according to the requirements of the operating instructions to ensure all normal applications of the equipment.
Want to know moreMowers, castings and forgingsThe content of the, can pay attention to our official website, we will continue to update.

Related News

Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.

How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.

Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.

Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.

Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.

What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.