Take you to understand the garden plate plough


toround plate ploughThe body is the working part of the tillage machine. The disk is usually part of a hollow spherical surface, the edge of which is sharpened to facilitate mowing and burying. The disc is independently supported on the bearing of the plow post. The plow surface of the disc forms an angle with the forward direction and the vertical direction respectively, which is called the deflection angle and the inclination angle. The general standard disc plough has 3 to 6 disc harrows.
During the operation, the device moves forward, the disk rolls into the soil, and the soil reservoir rises along the concave surface of the disk, while the soil reservoir is turned over and broken with the cooperation of the soil scraper. The garden plate plow is suitable for heavy, dry, rocky and multi-root soils. It does not require frequent grinding and replacement, low maintenance costs, and does not form a solid groove bottom. Although the mulching stubble is incomplete, it is beneficial to prevent the loss of water in dry land and the return of salt in saline-alkali land.


A tillage machine that uses concave circular discs to cultivate soil. When the tractor pulls the disc plough forward, the disc rotates around its central axis, the periphery of the disc cuts the soil, and the plowed soil rises along the concave surface of the rotating disc and turns to the side, leaving a furrow after the plough. The plowing effect is the same as the plow board plow, but the plowing quality is not as good as the plow board plow. In the cultivation of green fertile fields, grass roots, stony soil and cohesive wetlands, it has stronger cutting ability, good soil permeability, easy soil removal and not easy to block than plow board. The garden plate plow was invented around the end of the 19th century and then developed greatly. By 1962, the world's garden plow production accounted for 10 to 16% of the total number of plows. It is mainly used in the southern United States and central Oceania. China began to use garden plate plows in the late 1950 s and began to produce small garden plate plows in the mid-1960s, which were suspended, towed and matched with walking tractors.

Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.