Disc plough or disc harrow, silly can't tell.


Disc plows are very common in cultivated land, and so are disc harrows with only one word difference. Many people will ask, what is the difference between the two?Disc plough manufacturerTell you the answer.
To put it simply, the disc plow is used to turn over the ground and belongs to primary processing. The disc harrow is used for secondary processing on the turned land.
The difference between the two mainly lies in the following points.
First, the way of locomotive suspension connection. Most of the disc plows are three-point suspension, and the disc harrow has both large traction and small traction. This is a difference in type. Some people who use it frequently can see which type is what at a glance, just like the same vehicle brand has different models.
Second, the force situation is different when ploughing. The disc plough is installed at the position of the three-point hanging plough, which is the structure of installing two to several disc plough bodies and turning plate components, and is equipped with a tail wheel with balanced side pressure, and the group is subjected to large side pressure during operation. The disc harrow is composed of a traction frame, a harrow frame and a plurality of disc groups (a plurality of discs are worn on a square shaft as a group) symmetrically arranged under the harrow, the force during operation is relatively balanced.
Third, the role is different. Due to the different performance requirements for soil entry, soil crushing and soil turning, different instruments are generally used according to local conditions and depending on the land situation. The first type of instrument is required to have a strong ability to enter and turn the soil. If the ability to break the soil is required, the second type is selected.
about the difference between the two,Disc plough manufacturerTell you the answer. Are you clear?





Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.