Disc plough manufacturers, disc plough classification


disc ploughIt is a kind of equipment for arable land, which can save manpower and liberate people from busy life. When plowing, the unit moves forward, the disc rolls into the soil, and the soil dai rises along the concave surface of the disc while relying on the coordination of the soil scraping plate, making the soil dai flip and break. It is suitable for heavy, dry and hard, rocky and multi-root soils, and can be used in the most difficult geology in the process of ploughing. So what can be divided into several categories?
According to the disc installation method, it can be divided into two categories: ordinary type and vertical type.
The common type has a 10-30 degree angle between the plane of rotation and the forward direction, which can easily push the soil to increase the ability of plowing. A scraper is generally installed above and behind the concave surface of the disc to prevent soil adhesion. The curved surface of the scraper also has the function of assisting in turning over the soil. There are also two-way types that can be flipped left or right. The plow beam on which the plow post is installed can swing horizontally left and right relative to the plow frame to adapt to the reversing of the disc. The reversing control mechanism is of mechanical or hydraulic type. Bidirectionaldisc ploughCan make the soil always turn to the side of the field block, after ploughing the surface level off, leaving no ditches and ridges.
The vertical disc rotation surface is perpendicular to the ground, with only a deflection angle and no inclination. The discs are small and are mainly used for shallow tillage and stubble removal, in other words, in fields that have been barren for a long time.vertical disc plough, can do more with less.
There is also a common,driven disc plowIt was developed in some countries in the 1980 s. Tractor power output shaft drives groups of discs to rotate at a speed of about 120 r/min. It has good soil turning and soil crushing effects and can make better use of tractor power when it is used to plough wet land and rice stubble land.
AboveAnswerHope to be able to help you.

Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.