Garden plate plough manufacturer

Usually drivenround plate ploughThe left arm shell, the left arm shell, the right arm shell, the gear box, the gear, the net sleeve, the lever, the sprocket box, the cross shaft assembly, the disk shaft end is supported by the bearing on the lower bearing seat of the left arm, and the other end of the disk shaft is supported on the sprocket box. The gear set is installed on the input end of the cross shaft assembly. The driving sprocket and the slave sprocket are connected through a double chain, and the output end of the driving sprocket and the cross shaft assembly is connected to the fixed disc from the kinematic chain. This utility model can prevent the occurrence of broken chain faults, and can also avoid off-axis phenomena. It is used in conjunction with tractors. It also has the advantages of compact structure and flexible ground steering. It can also be used for ploughing operations, which greatly reduces labor intensity.

round plate ploughIt is composed of one or more discs. This composition out of the machinery, each is independently mounted on the main beam welded to the column. Each of them is equipped with a soil scraping plate, which also scrapes off the soil adhering to the concave surface, thus promoting the soil to turn over. In fact, there is a special tail wheel behind this one. This function is to bear the lateral reaction force of the soil to it, so that the unit can maintain stable movement during operation. Generally, the depth of cultivated land has a great relationship with the diameter. If the ability to enter the soil depends on the pressure of the cutting edge on the soil, it has a great relationship with its weight. This is an indirect soil cutting when the cutting edge is rolling, so the wear is relatively slow. For example, the wear amount is only the diameter and is relatively small. This can also be used normally.

Related News

Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.

How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.

Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.

Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.

Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.

What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.