The difference between a disc plough and a disc harrow manufacturer


Many consumers will have questions when buying, which is the specific difference between the two is where?round plate ploughandDisc harrow manufacturerThe difference between the two. Generally speaking, the former is used for turning over the ground, while the latter is used for further crushing of the ground.
1. The objects and operations of machines and tools are also different: the former is mostly used for tilling and turning of the last cultivated land, and this is also used for crushing and leveling of the cultivated land.
2. There is a difference between the way it is connected to the locomotive: this is a three-point suspension type, and it also requires a large traction type and a small suspension type.
3. The structure of the machine and the stress in the process of use: the position where the plough is installed like a three-point hanging plough can be changed to two or more ploughshares.round plate ploughThe structure of the body and the turnover plate assembly, the tail wheel that balances the side pressure when the device is installed, the unit will be subjected to high side pressure when working.Disc harrow manufacturerIt is also composed of a traction frame, a plowing climbing frame and a plurality of frames symmetrically arranged under the frame, and the stress is relatively balanced during work.
4. The main working parts are different in structure and device: because the performance requirements for soil penetration, soil crushing and soil turning are relatively high, the former has high structural strength requirements, its spherical concavity is very large, its thickness is also 0.5 to 1mm, and the blade angle is usually 12 degrees. When working, the plane and the forward direction are at an angle of 40 to 45 degrees, and the vertical plane is at an angle of 15 to 25 degrees. The latter in the work of the force is more balanced, the performance requirements of the soil is also general, in addition to a certain strength is required to have a good wear resistance, concavity is relatively small. The thickness of the cutting edge is 0.3 to 8mm, and the deflection angle of this work is 0 to 10 degrees, and there is no inclination angle.

Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.