Deep loosening machine operation process is what?


In agricultural production, in order to obtain high yield, we need not only excellent seeds, sufficient fertilizer, methods and means of pest control, but also advanced and applicable mechanization technology as support. The realization of soil subsoiling machine is actually a technological revolution in the field of agricultural farming. It is recognized as a highly effective and advanced technological agricultural system for increasing food production.

深松机

The following is the correct use of deep loosening machine:


1) The equipment should be maintained and used by a dedicated person who is familiar with the performance of the machine, the structure of the machine, and the adjustment method and purpose of each operating point.


2) Before work, check the connecting bolts of each component to avoid loosening. Check all parts of the grease, insufficient timely add. Check the wear of wearing parts.


3) Before the formal operation, the subsoiling test operation shall be carried out to adjust the subsoiling depth; the working conditions and operation quality of each part of the locomotive and tools shall be checked, and the problems found shall be adjusted and solved in time until the operation requirements are met.


4) During the subsoiling operation, the subsoiling interval distance shall be consistent. The operation shall be carried out at a constant speed and in a straight line.


5) During the operation, it shall be ensured that there is no secondary loosening, leakage and stacking.


6) During operation, check the operation condition at any time and clean up the blockage of the machine in time.


7) If there is any abnormal noise during operation, the operation shall be stopped in time, and the operation shall be continued after the cause is found out and solved.


8) When the machine is working, if hard and sharp resistance is encountered, the operation should be stopped in time, and the operation should be carried out after the conditions are eliminated.


9) When the machine is buried, it should be carried out slowly. Forced operation is not allowed to avoid damage to the machine.


10) After the equipment has been running for a period of time, it should be inspected and the fault should be repaired in time.


11) When the subsoiling machine is running, the unit must not rotate or reverse before lifting the machine.


12) No one shall sit on the machine during operation.


13) When the unit passes through the village, slow down and observe the surrounding situation.


14) After the end of a working season, the surface of the working parts should be coated with butter, and the whole machine should be stored in a rainproof, cool and dry place.


Types and features of subsoiling machine:


Mechanized subsoiling can be divided into local subsoiling and overall subsoiling according to the nature of the operation. Comprehensive subsoiling refers to the use of subsoiling plows to loosen the soil completely. This method is suitable for the transformation of shallow tillage layer soil and is coordinated with the basic construction of farmland. Partial deep loosening refers to the use of rod teeth, chisel shovel or mold to separate partial deep loosening from non-deep loosening.


At present, the soil subsoiling methods used in production mainly include interval subsoiling, ridge and furrow subsoiling, medium tillage subsoiling, shallow tillage subsoiling, ridging subsoiling and so on. According to the structural principle of the working machine, it can be divided into: chisel type deep loosening, wing spade type deep loosening, vibration type deep loosening, goose foot type deep loosening and so on. Due to different structural characteristics, different subsoiling machines have different operating performance, and the applicable soil and cultivated land types will also change.


Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.