The principle of deep loosening machine


deep loosening machineIt is a kind of farming machinery used in conjunction with high-power tractors, mainly used for mechanized plowing between rows or all-round deep plowing. The subsoiling machine has the functions of breaking the plough bottom, restoring the structure of the soil plough layer, improving the ability of soil water storage and moisture conservation, eliminating some weeds, reducing diseases and insect pests, leveling the surface, and improving the standard of agricultural mechanization operation. Subsoiling machine is a kind of farming machinery used in conjunction with high-power tractors, which is mainly used for mechanized plowing between rows or all-round deep plowing. The use of subsoiling machine is beneficial to improve the structure of soil tillage layer, break the bottom of the tillage layer, improve the ability of soil water storage and moisture conservation, and promote the growth of grain.


深松机


For safe operation, the following specifications should be paid attention to when using the subsover:
1. Before operating the deep loosening machine, agricultural operators should carefully read the operating procedures, be familiar with the performance of the deep loosening machine, and understand its structure and the adjustment methods of each operating point.
2. Before working on the subsoiling machine, check whether the parts are complete, whether there is deformation or damage, whether the adjustment mechanism is flexible, and whether the nut is fastened. If there is any problem, it should be adjusted in time.
3. When the subsoiler is started, the tractor should drive at a low speed so that the subsoiler shovel gradually enters the predetermined soil depth by its own weight. In the process of operation, should maintain a constant speed straight ahead.
4. During the operation of the deep loosening machine, no adjustment is allowed. If abnormal phenomenon is found, stop the machine immediately for inspection, and continue to work after troubleshooting.
5. After the operation of the deep loosening machine is finished, the deep loosening machine should be landed on the ground and should not be suspended for parking. The soil and weeds on the deep loosening machine should be removed in time, and the parts should be checked for damage.
Subsoiling machine is a mechanized technology that uses tractor to pull subsoiling machine or combined machinery with subsoiling parts to carry out inter-row or all-round deep ploughing of soil, which can effectively enhance soil water storage, drought resistance and waterlogging resistance, and increase crop yield. Subsoiling operation is to break the hard plough bottom, thicken the bottom soil layer, and improve the topsoil structure without turning over the soil or disturbing the original soil structure, so as to enhance the soil water storage and moisture conservation, drought resistance and waterlogging prevention ability, effectively improve the basic production capacity of grain, and promote the increase of crop production and farmers' income.
The deep loosening of agricultural machinery needs to be carried out according to different soil conditions and crop requirements, and the soil water content should be between 15% and 22%. It is generally recommended to soil once every 3-5 years. For the use of large-scale operating machinery or land has been leveled plots, should be as far as possible a deep ploughing. Deep loosening operation time for spring, summer harvest, autumn and winter. The depth of subsoiling is determined based on soil conditions and soil compaction, as well as the agronomic requirements of different crops. Generally, the deep loosening depth is above 35cm, which is 50-100mm deeper than the existing plough based on the ability to break the bottom layer.
The soil, weeds and other sundries on the working parts shall be removed in time, and the rotation of the depth limiting wheel and pressure wheel shall be checked to reduce the traction resistance and improve the operation quality.







Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.