The national "three autumn" mechanized production progress exceeded 80%, entering the closing stage


According to statistics from the Ministry of Agriculture and Rural Affairs, as of October 31, 580000 corn combine harvesters have been put into the "Three Autumn" production nationwide this year, completing a corn harvest of 0.39 billion mu, with a mechanical yield of more than 70%. Mechanical harvesting of 0.21 billion mu of medium rice, first-season rice and late rice, with a mechanical yield of more than 85%; Mechanical harvesting of soybean 61.19 million mu, with a mechanical yield of more than 80%; Mechanical harvesting of peanuts was 28.82 million mu, an increase of 8% over the same period last year; the cotton machine picking rate in the northern Xinjiang region and the corps of Xinjiang is over 80%. Mechanized field treatment of straw and residual film, land preparation in autumn and planting in autumn have been carried out simultaneously, and 0.26 billion mu of winter wheat have been mechanically sown, with a rate of over 90%. 0.117 billion mu of subsoiling and land preparation have been completed, with a progress of nearly 80%. The national "three autumn" mechanized production has entered the closing stage.

Since the start of mechanized production in the "Three Autumn" this year, various localities have rationally allocated operating machines and tools, carefully organized machine harvesting machines, and actively promoted high-performance equipment, green and efficient agricultural mechanization technology, and economical and convenient social service methods to be applied to agricultural production. Harvest, machine to work, continuous rotation of agricultural machinery, and continuous machine rest ".

 

Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.