Safe use of lawn mowers


lawn mowerVery dangerous. If used improperly, it is easy to cause personal injury or machine damage. Remind farmers to pay attention to the following issues when using the lawn mower, in the order of the following clauses and paragraphs.

 

圆盘犁

 

Read the instructions carefully: Before use, you should read the instructions carefully, keep in mind the safety precautions in the instructions, master the installation, adjustment, operation and maintenance methods, and understand the scope of application, supporting power, spindle speed and other technical parameters.
Installation and adjustment requirements of the lawn mower: it should be placed or fixed on a solid and flat foundation. Workplaces should be spacious and equipped with fire protection measures. The motor shall be selected in strict accordance with the matching power and speed specified in the manual. The power cord shall be copper wire of not less than 6mm square, and the current value carried by the power switch, socket, plug and other electrical appliances shall not be lower than the rated current of the motor calibration. The power switch should be installed within the operator's range of motion, generally no more than 3 meters from the operator, and there should be no other obstacles between the two.
Try to use the belt pulley that comes with the mower. It is not allowed to change the size of the pulley at will to increase the speed of the hay cutter. Adjust the clearance between each moving blade and the fixed knife. It is recommended to pass two sheets of printing paper and make sure that there is no friction between the moving knife and the fixed knife. After adjustment, tighten the fastening bolts of each moving blade and fixed knife (if necessary, increase the fastening degree by lengthening the wrench handle). After that, lock the upper housing to ensure that it is firm and reliable.
After the motor is installed and the belt is hung, power on for a short time. After checking and confirming that the rotation direction of the motor (drive wheel) is the same as that of the designated cutter wheel (reverse operation of the grass cutter is prohibited), hang the belt again and adjust it to moderate tension. A lawn mower. Install belt guards, grass hoppers and other accessories. Add an appropriate amount of lubricating oil to the parts that need lubrication, such as gearboxes and bearings.Disc plough, disc harrowThe use also needs attention.


Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.