Working principle and technical points of lawn mower


lawn mowerIt is a commonly used lawn mower equipment in the family. Its working principle is to use the power of the gasoline engine to drive the mowing wheel to rotate at a high speed through the transmission system, so that the mowing rope can be adjusted and rotated synchronously to generate a certain cutting force and cut weeds. The main technical point of using a lawn mower is to choose the length of the mowing rope according to the row spacing of the orchard and the height of the weeds, hold the handle with both hands, and maintain a certain inclination to use the lawn mower to mow. Do not use the lawn mower when it is wet, clean and maintain the lawn mower regularly.


割草机



lawn mowerThe working principle:
The lawn mower consists of a gasoline engine, a transmission rod and a mowing wheel. It weighs about 6kg and is operated by one person. Its working principle is: use the power of the gasoline engine to drive the mowing wheel to rotate at a high speed through the transmission system, so that the special polymer wire installed on the wheel can be adjusted and rotated synchronously to generate a certain cutting force, reduce weeds and start weeding.



割草机


lawn mowerThe use of technical points:
Uselawn mowerRemove the weeds. The effect is better when the weeds grow to 10-13cm. If the weed growth is too high, it should be done in two steps, first cutting the upper part, and then cutting the lower part. The length of the mowing rope on the mower should be determined by the orchard row spacing and weed height. If the row spacing is wider and the weeds grow taller, the length of the mowing rope should be longer, and vice versa.
When using the lawn mower, hold the handle with both hands and maintain a certain inclination on the side of the fruit tree so that the cut weeds fall on the side of the fruit tree as much as possible. Opening the throttle at a medium speed and moving forward at a constant speed can save fuel consumption and improve work efficiency. In addition, try to avoid weeds too thick to prevent the cutting rope from breaking. If necessary, you can manually remove thick grass before mowing with a lawn mower.
The lawn mower can not only be used for landscaping, but also plays a very important role in agricultural production. Agricultural mechanization has been realized, work efficiency has been improved, and agricultural production efficiency has been improved.Disc plough, planterThe use is also increasing.


Related News


Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.


How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.


Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.


Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.


Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.


What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.