Disc plough manufacturer, the reason why disc plough is not buried

disc ploughIt is often used in arable land with hard soil, many stubble and many stones, so it will be damaged frequently.Disc plough manufacturerFor your analysis of his common faults and cause analysis, don't thank us too much ~ the most common is that the disc is not buried.
1. Causes of failure.
disc ploughWhen working, the upper part of the disc cutting edge plane is inclined backward, and the included angle with the vertical plane is called inclination angle, which is usually 15 ° ~ 25 °. When the disc is adjusted to a more vertical position, that is, the inclination is smaller, it is easier to enter the soil. The greater the dip angle, the more difficult it is to cut into the soil. Dip angle should also be reduced when greater tillage depth is required. The dip angle is large, the tillage depth is stable and the work quality is improved.
There are two influencing factors. ① Factors affecting the inclination angle. There are mainly the position of the plow beam and the plow column relative to the plow blade, the deformation of the plow beam and the bending of the plow column affect the inclination adjustment, and the disc plow blade is deformed. ② Factors affecting the pressure of the cutting edge on the soil. The main weight of the plough is large, the pressure of the cutting edge on the soil is large, the easier it is to enter the soil. The thickness of the disc cutting edge is small, the pressure of the cutting edge on the soil is large, and the easier it is to enter the soil. Kan
2. Troubleshooting is simple.
① When the plow beam and plow column are deformed, they can be repaired by flame correction method. ② When the plough piece is deformed, it can be pressure shaping or flame shaping. When the weight of the plow body is small, the counterweight can be appropriately increased to increase the pressure of the disc plow blade on the soil. ④ When the thickness of the cutting edge of the disc is greater than 2mm, it should be ground in time to keep the thickness of the cutting edge between 0.5mm and 1.0mm.

Yucheng Dadi Machinery Manufacturing Co., Ltd.,Disc plough manufactureranswer for you.

Related News

Drive disc harrow price, deep loosening machine price: correct use and maintenance of disc harrow, deep loosening machine

The correct use and maintenance of the disc harrow: in operation, the technical condition of the rake, scraper, square shaft, bearing, angle adjuster and connecting parts should be checked frequently, especially the end nut of the disc harrow group and the fixing bolts of each bearing. If it is found loose, tighten it in time, and remove the weeds and dirt on the workpiece in time.

How to maintain planter accessories

Planter A planting machine using crop seeds as a planting object. Planters for a certain type or crop are usually named after the crop type, such as wheat planter, cotton planter, etc. Planter accessories are very effective in farmland operations, so the planter accessories are easily damaged. Next, the planter manufacturer will introduce how to maintain the planter accessories. Before using the planter, we should have a simple and comprehensive understanding of the principles of all planter accessories. The planter manufacturer stated that it can be effective as long as the maintenance is carried out on the correct accessories to ensure the normal use of the planter accessories. The planter will extend its life.

Defects in castings and forgings

The defects produced in the casting and forging process are similar to the defects produced in the ingot, but they are still process defects, including pores, inclusions, shrinkage holes, loose holes, cracks, etc.

Production of castings and forgings

Castings and forgings must be melted by electric furnaces, mainly electric arc furnaces and induction furnaces. According to the different lining materials and slag system, can be divided into acidic furnace and alkaline furnace. Carbon steel and low alloy steel can be smelted in any furnace, but high alloy steel can only be smelted in alkaline furnaces.

Inspection of Casting and Forging

The complex information system management interface of casting and forging, such as poor ultrasonic penetration, coarse grain, uneven organization, etc., all enhance the scattering of an ultrasonic wave by students, and the energy can be effectively attenuated, so that the detectable thickness is smaller than that of forgings.

What are the advantages and disadvantages of casting and forging

One of the advantages of casting and forging is the flexibility of design. Personnel design has a large degree of freedom of design choice for the shape and size of castings, especially for parts with complex shapes and hollow sections. Steel castings can be manufactured using a unique process known as core assembly.